By:Foshan diyi machinery thchnology co.,ltd. Date: 2019-08-24Hit: 2571次
Frequent problems often stop running (especially when there is no power), and the machine fails (because the machine has a problem, so the operation fails). Let's take a look at how the device is maintained:
1, daily care must keep up, the machine must be kept clean.
2. Regularly clean the filter screen of the oil pump to protect the oil pump pad and pump body. Properly use a thermometer to check the difference between the temperature of the pump and the new pump so that the relative leakage of the pump can be known. Regardless of the better sealing conditions of the suction pipe, the oil pump has a certain suction condition, so you must pay special attention to the oil in the fuel tank.
3, maintenance is to experience accumulation, usually more on the machine to sense the temperature of the valve body.
4, problems occur in time to record maintenance, prevent the same failure in the next time, have a certain perception of the speed of the machine so that it can avoid the possibility of overhaul.
5, be sure to keep the hydraulic oil clean, if there are holes in the mailbox surface, you can not repair it. Specially, the hole in the surface of the pipe through which the oil return pipe is inserted into the fuel tank must be sealed with rubber.
6. Always check the pressure of the machine, and the normal pressure, and use the three currents of the current meter side to protect the motor from normal operation to avoid sudden stop of the motor or motor overload.
For more information, please visit www.www001123.cn.
COPYRIGHT 2019 Foshan diyi machinery thchnology co.,ltd. 技術支持：誠匠網絡